Home › Showroom › Compare Products
Honda Power Equipment WT40 in Springfield, Missouri
Honda Power Equipment WT40
Honda Power Equipment WT40 in Springfield, Missouri
Honda Power Equipment WT40

Specs

General Information

Manufacturer
Honda Power Equipment
Honda Power Equipment
Model
WT40
WT40
Model Code
WT40XK3A
WT40XK3A
Color
Silver
Silver

Dimensions

Height
22.2 in.
22.2 in.
Width
21.1 in.
21.1 in.
Weight
Dry - 172 lb.
Dry - 172 lb.
Length
28.9 in.
28.9 in.

Engine

Fuel Tank Capacity
1.6 gal.
1.6 gal.
Speed
Run Time @ Max Discharge - 1.5 hr.
Run Time @ Max Discharge - 1.5 hr.
Bore x Stroke
3.5 x 2.5 in.
3.5 x 2.5 in.
Engine
GX390
GX390
Compression Ratio
8.2:1
8.2:1

Operational

Total Head Lift
82 ft.
82 ft.
Self Priming Time
150 sec.@ 16.4 ft.
150 sec.@ 16.4 ft.
Suction Head Lift
26 ft.
26 ft.
Suction Port Diameter
4 in.
4 in.
Maximum Pressure
36 psi
36 psi
Discharge Capacity
423 gal. / min.
423 gal. / min.
Volute
Rigid Mounted Cast Iron with Stainless Wear Plate
Rigid Mounted Cast Iron with Stainless Wear Plate
Solids Handling
1 1/16 in.
1 1/16 in.
Impeller
Conical Cast Iron
Conical Cast Iron
Pump
Trash Centrifugal Self-priming
Trash Centrifugal Self-priming
Seals

Pump Case - Silicon Carbide

Impeller - Silicon Carbide

Pump Case - Silicon Carbide

Impeller - Silicon Carbide

Discharge Port
Diameter - 4 in.
Diameter - 4 in.
Drive System
Direct
Direct

Other

Warranty
Residential / Commercial - 3 Years
Residential / Commercial - 3 Years

Features

Features

  • HEAVY-DUTY 4" CONSTRUCTION TRASH PUMP: Specially designed for job sites and applications where high volume trash water capacity is needed.
  • EASY STARTING HONDA OHV COMMERCIAL ENGINE: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • 423 GAL./MIN CAPACITY: The WT40 moves the most water out of any Honda pump.
  • SOLID HANDLING CAPABILITY UP TO 1 1/16": The specially designed impeller allows solids to pass through easily, without clogging.
  • HEAVY DUTY FULL FRAME PROTECTION: Protects the pump, while offering a convenient tie down location for transport.
  • EASY QUICK CLEAN OUT PORT: The WT40 is designed for quick and easy service. An easy access service port makes clean-out quick.
  • REPLACEABLE STAINLESS STEEL WEAR PLATE: The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs.
  • STANDARD SERVICE TOOL: A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
  • DURABLE SILICON CARBIDE MECHANICAL SEAL: Features abrasion-resistant silicone-carbide seals for extended wear.
  • CAST IRON VOLUTE AND IMPELLER: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • ISOLATION MOUNTED ENGINE AND PUMP: High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • UNIQUE CONICAL SHAPED IMPELLER: The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
  • 3 YEAR RESIDENTIAL/COMMERCIAL WARRANTY: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • PROTECTED BY HONDA OIL ALERT®: Protects the pump by shutting the engine off when low oil is detected.
  • LARGE HEAVY DUTY METAL STRAINER: The strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
  • Displacement: 389 cc

Features

  • HEAVY-DUTY 4" CONSTRUCTION TRASH PUMP: Specially designed for job sites and applications where high volume trash water capacity is needed.
  • EASY STARTING HONDA OHV COMMERCIAL ENGINE: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • 423 GAL./MIN CAPACITY: The WT40 moves the most water out of any Honda pump.
  • SOLID HANDLING CAPABILITY UP TO 1 1/16": The specially designed impeller allows solids to pass through easily, without clogging.
  • HEAVY DUTY FULL FRAME PROTECTION: Protects the pump, while offering a convenient tie down location for transport.
  • EASY QUICK CLEAN OUT PORT: The WT40 is designed for quick and easy service. An easy access service port makes clean-out quick.
  • REPLACEABLE STAINLESS STEEL WEAR PLATE: The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs.
  • STANDARD SERVICE TOOL: A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
  • DURABLE SILICON CARBIDE MECHANICAL SEAL: Features abrasion-resistant silicone-carbide seals for extended wear.
  • CAST IRON VOLUTE AND IMPELLER: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • ISOLATION MOUNTED ENGINE AND PUMP: High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • UNIQUE CONICAL SHAPED IMPELLER: The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
  • 3 YEAR RESIDENTIAL/COMMERCIAL WARRANTY: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • PROTECTED BY HONDA OIL ALERT®: Protects the pump by shutting the engine off when low oil is detected.
  • LARGE HEAVY DUTY METAL STRAINER: The strainer allows up to 1 1/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
  • Displacement: 389 cc